Siemens SIMOCODE pro V - Parameter Assignment Details

3 Engineering
Blocking Protection for Pumps with SIMOCODE pro V
Article ID: 109478058, V2.0, 09/2020
31
© Siemens AG
2020 All rights reserved
3.3.2 Parameter assignment for the SIMOCODE pro V PN
PROFINET parameters
1. Double-click the "Parameters" command in the project tree.
2. Go to "PROFINET parameters" and enter the following parameters.
– IP parameters
– Select Basic type 3 so that you can transmit all of the send data described
in 2.2.11 to the controller.