Maintenance
9.3 Corrective maintenance
Standard motors SH 63 ... 355
108 Operating Instructions, 12/2018, A5E38483075A
① Heat up 80 ... 100 °C
9.3.1.1 Bearing bushes
Protect the bearings against the ingress of dirt and moisture.
When fitting the bearing cartridges, observe the specified screw tightening torques
(Page 142).
9.3.1.2 Installing rolling bearings
● Extreme caution and attention to cleanliness are vital when installing rolling bearings.
Observe the correct assembly sequence of the components.
● Attach all components with the specified tightening torques (Page 141).
Note
For further information about
mounting the rolling bearing, please refer to the catalog or
the information provided by the rolling bearing manufacturer.
To Next Page
Loading...
