Spare parts
10
10.1 Ordering data
When ordering spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type 1RQ7
● Serial number 1516127010001
The machine type and the serial number are indicated on the rating plate and in the technical
data, and are also embossed on the drive end of the shaft.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
You can use commercially available, standard components, but ensure that they have the
same construction type, dimensions, strength class etc.
Terminal box
If several terminal boxes are mounted on the machine, please also indicate the type
designation of the terminal box in addition to details of part designation and part number
according to the legend, as well as type and serial number of the motor when ordering spare
parts.
Example
● Terminal box type
● Terminal box cover (part 20.30 )
● Serial number of the motor
● Machine type
Rolling-contact bearings
When ordering roller bearings, in addition to the bearing identification code, the supplementary
specifying code is also necessary for the bearing version. Both of these codes are stamped
on the lubricant plate and specified in the motor documentation, or can also be taken from the
installed bearings.
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018 109
To Next Page
Loading...
Need help?
General