Siemens SIMOTICS HV M User Manual

4.15.4 Lifting and transportation
● Persons driving cranes and fork-lift trucks must hold appropriate licenses.
● If the motor is packed, depending on the weight, size and on-site conditions, lift crates and
transport frames using a fork-lift truck or a crane with slings. Use a crane or fork-lift truck
suitable for the load.
● When lifting the machine, use only approved and undamaged sling guides and spreaders
of sufficient rated capacity. Check this equipment before using it. The weight of the machine
is shown on the rating plate.
● If adapter flange and adapter plates are also supplied, then lift them and transport these
parts separately. The load suspension equipment for the motor is not rated for lifting the
motor with mounted adapter flange is or adapter plates
Preparations for use
4.15 Transport and storage
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018 29

Siemens SIMOTICS HV M Specifications

General

Brand	Siemens
Model	SIMOTICS HV M
Category	Engine
Language	English