Siemens SIMOTICS S-1FT7 - Page 388

Electrical connection
8.3 System integration
S-1FT7 synchronous motors
386 Configuration Manual, 09/2018, A5E45099423B AA
Connection of a 3-phase separately driven fan
Table 8- 15 Connection values for a 3-phase separately driven fan for the 1FT7 shaft height 132
Shaft height
Max. current consumption at
400 V / 50 Hz (±10 %)
in A
400 V / 60 Hz (±10 %)
in A
480 V / 60 Hz (±10 %)
in A
132
0.21
0.19
0.23
Circuit diagram
1
Connector size M23 (with full thread)
2
Connector SPEED-CONNECT size M23
3
Terminal for the cable shield
4
Pin assignment
5
Circuit diagram
6
Cable shield
7 Conductor designation:
Power cable, 1.5 mm
2
PE = protective conductor, 1.5 mm²
Figure 8-8 Connecting to a 3-phase separately driven fan, connector size M23