Commissioning
6
6.1 Commissioning sequence
We recommend that you commission the basic positioner using a PC tool.
PC tools
STARTER and Startdrive are PC tools that are used to commission, troubleshoot and control the
converter, as well as to back up and transfer the converter settings. You can connect the PC with
the converter via USB or via the PROFIBUS / PROFINET eldbus.
Connecting cable (3 m) between PC and converter: Article number 6SL3255-0AA00-2CA0
Startdrive DVD: Article number 6SL3072-4CA02-1XG0
Startdrive, system requirements and download (https://
support.industry.siemens.com/cs/ww/en/view/109760844)
Startdrive tutorial (http://support.automation.siemens.com/WW/view/en/73598459)
STARTER videos (http://www.automation.siemens.com/mcms/mc-drives/en/low-voltage-
inverter/sinamics-g120/videos/Pages/videos.aspx)
Basic positioner
Function Manual, 09/2020, FW V4.7 SP13, A5E34257659B AG 35
To Next Page
Loading...
