Siemens SINAMICS G120 - Jogging; Jog Velocity

6.7 Jogging
6.7.1 Jog velocity
Description
Only input a setpoint velocity for the converter for velocity jog. With the signal "Jogging 1" or
"Jogging 2", the converter accelerates the axis to the relevant setpoint velocity. The converter
stops the axis when the respective "Jog" signal returns to zero.
-RJJLQJ
-RJJLQJ
-RJJLQJVHWSRLQWYHORFLW\
-RJJLQJVHWSRLQWYHORFLW\
-RJJLQJDFWLYH
3RVLWLRQVHWSRLQWUHDFKHG
W
W
W
Y
W
V
Figure 6-15 Jog velocity
Commissioning
6.7 Jogging
Basic positioner
70 Function Manual, 09/2020, FW V4.7 SP13, A5E34257659B AG