Installing/mounting
4.3 Power losses and air cooling requirements
Power Module PM240-2
30 Hardware Installation Manual, 01/2017, A5E33294624B AE
Power loss for Power Modules with push-through technology - PT devices
When you use PT Power Modules, the majority of the power loss is dissipated through the
heatsink located outside the control cabinet.
The following losses occur in the cabinet when the device is operated with its rated data:
● FSA: 0.02 kW
● FSB: 0.045 kW
● FSC: 0.075 kW
To Next Page
Loading...
