Siemens SINAMICS PM240-2 - Connecting the Line and Motor Cable at the Inverter; Connection Overview

Connecting-up
5.2 Connecting the line and motor cable at the inverter
Power Module PM240-2
Hardware Installation Manual, 01/2017, A5E33294624B AE
49
5.2
Connecting the line and motor cable at the inverter
5.2.1
Connection overview
Note
Line reactor
A line reactor is not required for the Power Modules FSD … FSF.
Line filter
The inverters are available with or wi
thout integrated line filter (Class A). For frame sizes
FSA
… FSC, 3 AC 400 V, there are external filters (Class B) for increased EMC
requirements.
Line filter (Page 113)
Output reactor
An output reactor is not required for the Power Modules FSD … FSF.
Figure 5-2 Block diagram of the inverter, FSA ... FSC
Figure 5-3 Block diagram for the inverter, FSD ... FSF