Siemens SINAMICS S120 - Parameter Set Changeover

Drive functions
5.2 Functions
Hydraulic Drive
System Manual, 04/2015, 6SL3097-4BA00-0BP1
141
5.2.2
Parameter set changeover
It is possible to switch between 8 different parameter sets. Data that are assigned to specific
parameter sets are identified by an [n] in the string code [0...7].
The data set switchover allows the system to be adapted or optimized to different operating
points, for example.
A PLC coordinates the data set switchover.
Figure 5-1 Example of a parameter set switchover