Siemens SINAMICS S120 - Page 96

Commissioning
4.17 Editing the valve characteristic
Hydraulic Drive
96 System Manual, 04/2015, 6SL3097-4BA00-0BP1
Overview of important parameters (see SINAMICS S120/S150 List Manual)
•
r1468
Velocity co
ntroller P gain effective
•
p1830[0...n]
Factor plane adaptation positive
•
p1831[0...n]
Factor plane adaptation negative
•
p1832[0...n]
Valve offset
•
p1833[0...n]
Transition point compensation Q1 positive zero range
•
p1834[0...n]
Transition point compensatio
n U1 positive zero range
•
p1835[0...n]
Transition point compensation rounding 1 positive zero range
•
p1836[0...n]
Transition point compensation Q1 negative zero range
•
p1837[0...n]
Transition point compensation U1 negative zero range
•
p1838[0...n]
Transiti
on point compensation rounding 1 negative zero range
•
p1839[0...n]
Transition point compensation Q2 positive
•
p1840[0...n]
Transition point compensation U2 positive
•
p1841[0...n]
Transition point compensation rounding 2 positive
•
p1842[0...n]
Transition po
int compensation Q2 negative
•
p1843[0...n]
Transition point compensation U2 negative
•
p1844[0...n]
Transition point compensation rounding 2 negative
•
p1845[0...n]
Transition point compensation Q3 positive saturation
•
p1846[0...n]
Transition point compensat
ion U3 positive saturation
•
p1847[0...n]
Transition point compensation Q3 negative saturation
•
p1848[0...n]
Transition point compensation U3 negative saturation