Options and spare parts
B.1 Options
SINAMICS V20 Converter
394 Operating Instructions, 10/2019, A5E34559884-012
Outline dimensions (mm)
Fixing the shield connection kit to the converter
If the converter is mounted in a control cabinet:
Fixing to FSAA/FSAB
① Loosen the PE screw and slide the shielding plate
from below, then retighten the screw to 1.8 Nm (toler-
ance: ± 10%).
② Fold the cable shield clamp to suit the cable diameter
during converter installation.
To Next Page
Loading...
