Siemens SINEMA Remote Connect - Page 108

Upkeep and maintenance
5.1 Backing up and restoring the system configuration
SINEMA Remote Connect - Server
108 Operating Instructions, 11/2017, C79000-G8976-C383-04
Backing up configurations
Requirement
● The user has been assigned the right "Create backup copies".
● The settings for the backup copy are configured.
Procedure
1. In the navigation panel, select "System > > Backup & restore".
2. Click the "Create new backup copy" button.
3. In the dialog that follows, enter a comment on the backup copy.
4. Click the "Finish" button.
Result
A backup copy (*.backup) with the system settings of the SINEMA RC Server has been
created.
Restoring the configuration
Requirement
● On the system, the SINEMA RC version is installed with which the backup copy was
created.
Importing the backup
1. In the navigation panel "System > Backup & restore" select the "Settings" tab.
2. Enter the same coding key with which the backup was created and save the settings.
3. Click the "Import backup copy" button.
4. Click the "Browse" button.
5. Select the required file in the format *.backup and confirm your selection with the "Open"
button.
6. Click the "Finish" button. The backup is displayed in the overview.
7. Click on the "Restore" button to adopt the system configuration of the selected backup
copy.
Click the "Restore" button in the next dialog.