Upkeep and maintenance
5.1 Backing up and restoring the system configuration
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
109
Backup was imported into the same server / hardware with the existing installation
SINEMA RC Server takes the system settings from the selected backup copy and continues
working with these. All settings made up to this point that have not been saved in a backup
copy are lost.
Backup was imported into a different server / hardware with a new installation and the same
network settings.
After adoption, the system is restarted and the logon page of SINEMA RC Server is opened.
The backed up certificates are imported.
Backup was imported into a different server / hardware and a new installation with different
network settings.
After the restart, the logon page of the SINEMA RC Server is opened. The certificates are
not imported but created new.
To Next Page
Loading...
