Configuring with Web Based Management
4.6 System
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
63
4. Select the required file in the format *.backup and confirm your selection with the "Open"
button.
5. Click the "Finish" button.
6. In "Actions" click on the "Restore" button to adopt the system configuration of the
selected backup copy.
SINEMA RC Server takes the system settings from the selected backup copy and continues
working with these settings. All settings made up to this point that have not been saved in a
backup copy are lost. For more detailed information, refer to section "Upkeep and
maintenance".
To Next Page
Loading...
