Siemens SINUMERIK 802C base line

Technical Appendix
6-30 SINUMERIK 802C base line
Start-Up
6.2.6 Signals from/to MMC
Program control signals from MMC (retentive area) (see also signals to channel V32000000)
1700
Data block
MMC signals [r]
Interface MMC -----> PLC
DBB Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Dry run
17000000 feed M01
(MMC --->
PLC)
selected selected
17000001
(MMC -->
PLC)
Program
test
selected
Feed
override
for rapid
traverse
selected
Select
17000002 Skip
(MMC -->
PLC)
Block
17000003
(MMC --->
PLC)
Dynamic mode signals from MMC
1800
Data block
Signals from MMC [r]
Interface MMC -----> PLC
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
18000000
Machine function
18000001
TEACH
IN
18000002
18000003