Siemens SINUMERIK 802C base line

Technical Appendix
6-2 SINUMERIK 802C base line
Start-Up
6.1.1 Display machine data
Number MD Name
Representation Name, Miscellaneous Activated User Class w/r
Unit Standard value Minimum value Maximum value Data type
202 $MM_FIRST_LANGUAGE
Decimal Foreground language
Power On
2/3
0 112Byte
203 $MM_DISPLAY_RESOLUTION
Decimal Display resolution
Power On
2/3
0 305Byte
206 $MM_USER_CLASS_WRITE_TOA_GEO
Decimal User class Write tool geometry
Immediately
2/3
0 307Byte
207 $MM_USER_CLASS_WRITE_TOA_WEAR
Decimal User class Write tool wear data
Immediately
2/3
0 307Byte
208 $MM_USER_CLASS_WRITE_ZOA
Decimal User class Write settable zero offset
Immediately
2/3
0 307Byte
210 $MM_USER_CLASS_WRITE_SEA
Decimal User class Write setting data
Immediately
2/3
0 307Byte
216 $MM_USER_CLASS_WRITE_RPA
Decimal User class Write R parameters
Immediately
2/3
0 307Byte
217 $MM_USER_CLASS_SET_V24
Decimal User class Set V24
Immediately
2/3
0 307Byte
219 $MM_USER_CLASS_DIR_ACCESS
Decimal User class access directory
Immediately
2/3
0 307Byte
243 V24_PG_PC_BAUD
Bit PG: Baud rate (300, 600, 1200, 2400, 4800, 9600,
19200, 38400)
Immediately
3/3
707Byte
277 $MM_USER_CLASS_PLC_ACCESS
Decimal User class access PLC project
Immediately
2/3
0 307Byte