Siemens SINUMERIK 802C base line User Manual

Start-Up
4-34 SINUMERIK 802C base line
Start-Up
Number Description Default Value
10074 Division ratio of the PLC task factor for main run 2
11100 Number of auxiliary function groups 1
11200 Standard machine data loaded on next Power On O
H
11210 MD backup of changed MD only 0FH
11310 Threshold for direction change of handwheel 2
11320 Handwheel pulses per detent position (handwheel
number): 0...1
1
20210 Maximum angle for compensation blocks with TRC 100
20700 NC–Start disable without reference point 1
21000 Circle end point monitoring constant 0.01
22000 Auxiliary function group (aux. fct. no. in channel):
0...49
1
22010 Auxiliary function type (aux. fct. no. in channel):
0...49
“”
22030 Auxiliary function value (aux. fct. no. in channel):
0...49
0
22550 New tool compensation for M function 0
Setting data
Number Explanation DefaultValue
41110 Jog feedrate 0
41200 Spindle speed 0
42000 Start angle 0
42100 Dry run feedrate 5000

Siemens SINUMERIK 802C base line Specifications

General

Brand	Siemens
Model	SINUMERIK 802C base line
Category	Controller
Language	English