Installing the Control System
2.3 Connecting the individual components
2-32
SINUMERIK 802S
6FC5 597–2AA00–0BP2 (01.02)
L– Reference potential for digital inputs
Signal type
VI Voltage input
DI Input (24 V signal)
K Switching contact
4 BERO inputs
These inputs are 24 V-P switching. Either switches or non–contact sensors, such as inductive
sensors (BEROs), can be connected.
When using the BERO as a reference point switch, the following fixed assignment will apply:
BERO1 - X axis
BERO3 - Z axis
To Next Page
Loading...
