The axis traverses additionally the compensation value calculated for the current
actual position as soon as the position-dependent temperature compensation becomes
active (MD32750 $MA_TEMP_COMP_TYPE = 2 or 3).
SD irrelevant for ......
MD32750 $MA_TEMP_COMP_TYPE = 0 or 1
Related to ....
MD32750 $MA_TEMP_COMP_TYPE Temperature compensation type
SD43910 $SA_TEMP_COMP_SLOPE Angle of slope for position-dependent temperature
compensation
NC setting data
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1 353
To Next Page
Loading...
