Siemens SINUMERIK 808D ADVANCED

Machine data
3
3.1 Display machine data
1091 SINAMICS_IBN_TIMEOUT_VALUE - -
- Wait time when reading in parameters for Sinamics commissioning DWORD Immediately
-
- - 230 0 1000 3/3 U
Description: Defines the wait time on read-in of the parameters for all SINAMICS devices during
commissioning
1092 MAX_SPINDEL_SPEED_MANUAL_MA - -
- Input limit spindle speed MM+ DOUBLE Immediately
-
- - 99999.00000 0 99999.00000 2/2 M
Description: Input limit spindle speed MM+
1093 MAX_SPEED_G96_MANUAL_MA - -
- Input limit cutting meter MM+ DOUBLE Immediately
-
- - 99999.00000 0 99999.00000 2/2 M
Description: Input limit cutting meter MM+
1094 MAX_FEEDRATE_G94_MANUAL_MA - -
- Input limit time feed MM+ DOUBLE Immediately
-
- - 99999.00000 0 99999.00000 2/2 M
Description: Input limit time feed MM+
1095 MAX_FEEDRATE_G95_MANUAL_MA - -
- Input limit rotation feed MM+ DOUBLE Immediately
-
- - 99999.00000 0 99999.00000 2/2 M
Description: Input limit rotation feed MM+
1096 MAX_NUM_CYCLE_MANUAL_MA - -
- Number of managed masks per cycle in manual mode of MM+ DWORD Immediately
-
- - 9 1 9 3/3 U
Description: Number of managed masks per cycle in manual mode of MM+
1097 MAX_NUM_CUTT_EDGES_MANUAL_MA - -
- Number of managed cutting edges in MM+ DWORD Immediately
-
- - 9 1 9 3/3 U
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1 21