Siemens SINUMERIK 808D ADVANCED

Description: Number of managed cutting edges in MM+
1098 INVERT_SPIN_ICON_MANUAL_MA - -
- The direction of spindle rotation is displayed inverted. BOOLEAN Immediately
-
- - 1 0 1 3/2 M
Description: The direction of spindle rotation is displayed inverted.
1099 USE_FIXPOINT_MANUAL_MA - -
- Tool change step MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Tool change increment MM+:
The selection field for fixed-point approach is selected or deselected by default
1100 MEAS_SPIN_ACTIV_MANUAL_MA - -
- Measuring the tool offset data in the X direction with the spindle
rotating
BOOLEAN Immediately
-
- - 1 0 1 3/2 M
Description: If the value is 1, the tool offset data can be measured in the X direction with
rotating spindle.
1101 USER_TOOL_CHG_MANUAL_MA - -
- Tool change step MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Tool change increment MM+:
If the value is 1, input of a tool or cutting edge number is permissible.
1102 CYC_TOOLNO_EDTMODE_MANUAL_MA - -
- Input mode T no. in the cycle screen forms MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Input mode T no. in the cycle masks MM+:
0: No T no. input by the operator. T no. is automatically created from SGUD.
>=1: T no. input by the operator
1103 TAPPINGCYCLE_MODE_MANUAL_MA - -
- Preselection cycle type for thread tapping MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Preselection of cycle type on tapping MM+:
With compensating chuck without compensating chuck
0 CYCLE840 CYCLE840
1 CYCLE840 CYCLE84
>=2 CYCLE840 not possible
Machine data
3.1 Display machine data
Parameter Manual
22 Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1