1104 TOOL_CHG_MANUALMODE_MA - -
- Enable tool change in the jog function of the MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Tool change enable in the JOG function of the MM+
1105 STARTUP_WITH_MMP - -
- Automatic start of the MM+ after power on BOOLEAN PowerOn
-
- - 1 0 1 3/3 U
Description: Automatic start of MM+ after power ON
1106 SOFTKEY_CENTRE_ADJ - -
- Softkey text is adjusted BOOLEAN PowerOn
-
- - 1 0 1 3/3 U
Description: Text on the softkeys is justified
1107 AX_LOAD_DISPL - -
- Activate axis utilization display BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Activate axis utilization display
1110 ENABLE_LADDER_DB_ADDRESSES - -
- DB representation in the PLC ladder viewer BOOLEAN Immediately
-
- - 1 0 1 7/2 M
Description: DB representation in the PLC ladder viewer
0 - VB representation of the PLC signals
1 - DB representation of the PLC signals
1111 ENABLE_LADDER_EDITOR - -
- Activate/deactivate PLC ladder editor BOOLEAN Immediately
-
- - 1 0 1 7/2 M
Description: Activate/deactivate PLC ladder editor
0 - No editing functionality for PLC programs
1 - Activate edit functionality for PLC programs
203 DISPLAY_RESOLUTION - -
- Display resolution for mm dimension system BYTE Immediately
-
- 0 3 0 5 3/2 M
Description: This MD is used to define the number of decimal places of the position display, for
linear axes in metric systems, in general for rotary axes.
Spindle positions are treated like rotary axis positions.
Machine data
3.1 Display machine data
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1 23
To Next Page
Loading...
Need help?
General
