Parameter Manual
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
205
Machine data
2.4 Axis-specific machine data
Bit 9 = 1:
The PRESETON is inhibited. PRESETONS is enabled.
Description: MD30465 $MA_AXIS_LANG_SUB_MASK defines for the leading spindle(s) of a cou-
pling (synchronous spindle coupling, ELG, tangential tracking, coupled
motion, master value coupling, master/slave) which language constructs/func-
tions are to be substituted by the user program set by MD15700
$MN_LANG_SUB_NAME / MD15702 $MN_LANG_SUB_PATH (default: /_N_CMA_DIR/
_N_LANG_SUB_SPF).
The substitution is executed only if a coupling is active for the relevant
spindle and, in the case of a gear stage change, only if a gear stage change
is actually pending.
Bit 0 = 1:
Automatic (M40) and direct (M41-M45) gear stage change
Bit 1 = 1:
Spindle positioning with SPOS/SPOSA/M19
30465 AXIS_LANG_SUB_MASK N01 K1
- Substitution of NC language commands DWORD PowerOn
-
- - 0x0 0x0 0x3 1/1
Siemens Controls
To Next Page
Loading...
