Siemens SINUMERIK 808D ADVANCED

Machine data
2.2 General machine data
Parameter Manual
60 Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
...
AUXFU_GROUP_SPEC[n]=41H
Description: Execution right assigned to the program stored in directory /_N_CST_DIR :
Value 0: Siemens password
Value 1: Machine OEM password
Value 2: Password of setup engineer, service
Value 3: End user password
Value 4: Keyswitch position 3
Value 5: Keyswitch position 2
Value 6: Keyswitch position 1
Value 7: Keyswitch position 0
Machine data can only be written with values 0 and 1, and with the corre-
sponding password also active.
Description: Execution right assigned to the programs stored in directory /_N_CMA_DIR :
Value 0: Siemens password
Value 1: Machine OEM password
Value 2: Password of setup engineer, service
Value 3: End user password
Value 4: Keyswitch position 3
Value 5: Keyswitch position 2
Value 6: Keyswitch position 1
Value 7: Keyswitch position 0
Machine data can only be written with values 0 and 1, and with the corre-
sponding password also active.
Description: Execution right assigned to the programs stored in directory /_N_CUS_DIR :
Value 0: Siemens password
Value 1: Machine OEM password
Value 2: Password of setup engineer, service
Value 3: End user password
Value 4: Keyswitch position 3
Value 5: Keyswitch position 2
Value 6: Keyswitch position 1
Value 7: Keyswitch position 0
Machine data can only be written with values 0, 1 and 2, and with the corre-
sponding password also active.
11160 ACCESS_EXEC_CST N01 -
- Execution right for /_N_CST_DIR BYTE PowerOn
-
-- 7 0 7 2/2
11161 ACCESS_EXEC_CMA N01 -
- Execution right for /_N_CMA_DIR BYTE PowerOn
-
-- 7 0 7 2/2
11162 ACCESS_EXEC_CUS N01 -
- Execution right for /_N_CUS_DIR BYTE PowerOn
-
-- 7 0 7 3/3