Machine data
2.4 Axis-specific machine data
Parameter Manual
292
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
Description:
General: decimal representation, with a b
a
0: Leading axis
1: Synchronized axis
b
0: No gantry axis
1: Axis in gantry grouping 1
2: Axis in gantry grouping 2
3: Axis in gantry grouping 3
...
A max. of 8 gantry groupings is possible.
Examples:
11: Axis is a synchronized axis in a gantry grouping 1
2: Axis is a leading axis in gantry a grouping 2
12: Axis is a synchronized axis in a gantry grouping 2
3: Axis is a leading axis in a gantry grouping 3
13: Axis is a synchronized axis in a gantry grouping 3
Special cases:
Alarm 10650 "Incorrect gantry machine data" and 10651 "Gantry unit not
defined" in the case of an incorrect gantry axis definition.
Related to:
MD37110 $MA_GANTRY_POS_TOL_WARNING (gantry warning limit)
MD37120 $MA_GANTRY_POS_TOL_ERROR (gantry trip limit)
MD37130 $MA_GANTRY_POS_TOL_REF (gantry trip limit during referencing)
37100 GANTRY_AXIS_TYPE A01, A10 G1,TE1,Z3
- Gantry axis definition BYTE PowerOn
CTEQ
808d-me42 - 0 0 11 -1/2
808d-me62 - 0 0 11 1/1
808d-te42 - 0 0 11 -1/2
808d-te62 - 0 0 11 1/1
To Next Page
Loading...
Need help?
General
