Siemens SINUMERIK 808D ADVANCED

Parameter Manual
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
83
Machine data
2.2 General machine data
Description: Value = 0 : If machine data that redefines the buffered memory is modified,
then generally the alarm 4400 is output which indicates that the user data
will be deleted the next the software is started.
Value = 1 : If machine data that redefines the buffered memory is modified,
then generally the alarm 4400 is not output. This means the data is retained
the next time the software is started.
The preassigned value is selected model-specifically and generally it must
not be changed.
Description: File name with file path where the data backup file is stored if the persis-
tent memory is reconfigured.
Description: During power on of the control, a unique hardware serial number is stored in
this MD:
• For Powerline series modules this is the serial number of the NCU module
• For Solutionline series modules this is the serial number of the CF card,
or the unique number of the MCI module in the case of PC-based systems
This data cannot be written.
Description: Version identifiers of the system software
17950 IS_AUTOMATIC_MEM_RECONFIG EXP, N02 -
- System: automatic memory reconfiguration BOOLEAN PowerOn
-
-- FALSE- - 1/0
17951 AUTOMATIC_MEM_RECONFIG_FILE EXP -
- Path and file name for internal data backup STRING PowerOn
-
- - /siemens/sinumerik/
sys_cache/nck/
content.afs
- - 1/0
18030 HW_SERIAL_NUMBER N05 -
- Hardware series number STRING PowerOn
-
- 1 - - ReadOnly
18040 VERSION_INFO N05 IAD
- Version STRING PowerOn
-
808d-me42 5 808D-ME42 - - ReadOnly
808d-me62 5 808D-ME62 - - ReadOnly
808d-te42 5 808D-TE42 - - ReadOnly
808d-te62 5 808D-TE62 - - ReadOnly
Siemens Controls