Siemens SINUMERIK 808D ADVANCED - Page 89

Parameter Manual
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
89
Machine data
2.2 General machine data
Description: Number of servo data, which must be recordable at the same time (user-spe-
cific).
The individual values involve the users of the logging function, which are
assigned the following functions:
0: Reserved for system functions: simultaneous recording, simulation, syn-
chronized action analysis
1: Reserved for system functions: determining program runtimes, multi-step
editor
2: Reserved for OEM applications
3: Reserved for OEM applications
4: Reserved for OEM applications
5: Reserved for system functions: trace
6: Reserved for system functions: trace
7: Reserved for system functions: trace
8: Reserved for system functions: trace
9: Reserved for system functions: action log
Description: Size of the data buffer between the IPO and preprocessing time levels of a
log file [ Bytes ].
The individual values involve the users of the logging function, which are
assigned the following functions:
0: Reserved for system functions: simultaneous recording, simulation, syn-
chronized action analysis
1: Reserved for system functions: determining program runtimes, multi-step
editor
2: Reserved for OEM applications
3: Reserved for OEM applications
4: Reserved for OEM applications
5: Reserved for system functions: trace
6: Reserved for system functions: trace
7: Reserved for system functions: trace
8: Reserved for system functions: trace
9: Reserved for system functions: action log
18373 MM_PROTOC_NUM_SERVO_DATA N02 D1
- Number of servo data for log DWORD PowerOn
-
- 10 0, 0, 0, 0, 0, 10, 10,
10...
0 20 1/1
18374 MM_PROTOC_FILE_BUFFER_SIZE N02 -
- Size of log file buffer DWORD PowerOn
-
- 10 15000, 8000, 8000,
8000, 8000, 15000...
5000 - 1/1
Siemens Controls