Machine data
2.3 Channel-specific machine data
Parameter Manual
92
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
Description:
This MD is used to enter the names of the geometry axes separately for each
channel. Geometry axes can be programmed in the part program using the names
specified here.
Special cases:
• The geometry axis name entered must not conflict with the designations
and assignments of the machine and channel axis names or other identifi-
ers.
Names for Euler angle (MD10620 $MN_EULER_ANGLE_NAME_TAB),
Names for direction vectors (MD10640 $MN_DIR_VECTOR_NAME_TAB),
Names for intermediate circle point coordinates for CIP (MD10660
$MN_INTERMEDIATE_POINT_NAME_TAB) and the
Names for interpolation parameters (MD10650 $MN_IPO_PARAM_NAME_TAB) coin-
cide.
• The geometry axis name entered must not include any of the following
reserved address letters:
- D Tool offset (D function) - E Reserved
- F Feedrate (F function) - G Path condition
- H Auxiliary function (H function) - L Subroutine call
- M Miscellaneous function (M function) - N Subblock
- P Subroutine number of passes - R Arithmetic parameters
- S Spindle speed (S function) - T Tool (T function)
• The name must not include any keywords (e.g. DEF, SPOS etc.) or pre-
defined identifiers (e.g. ASPLINE, SOFT).
• The use of an axis identifier consisting of a valid address letter (A, B,
C, I, J, K, Q, U, V, W, X, Y, Z) followed by an optional numerical exten-
sion (1-99) gives slightly better block cycle times than a general iden-
tifier.
• Identical names may be given to geometry axes assigned to different chan-
nels.
Corresponds with:
MD10000 $MN_AXCONF_MACHAX_NAME_TAB
(machine axis name [axis no.])
MD20080 $MC_AXCONF_CHANAX_NAME_TAB
(channel axis name in the channel [channel axis no.])
20060 AXCONF_GEOAX_NAME_TAB C01, C11, C10 F2,V2,M1,K2
- Geometry axis name in channel STRING PowerOn
-
808d-me42 3 X, Y, Z, X, Y, Z... - - 1/1
808d-me62 3 X, Y, Z, X, Y, Z... - - 1/1
808d-te42 3 X, , Z - - 1/1
808d-te62 3 X, , Z - - 1/1
To Next Page
Loading...
Need help?
General
