Siemens SINUMERIK 840C - Synchronization Error on Power-Up; Error in Programmer Link

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
2–14
SINUMERIK 840C / SIMODRIVE 611–D (DA)
Synchronization error
on power-up
Address
F0000 F0001
Error
66 1 Cold restart: synchronization error master CPU
67 1 Restart: synchronization error master CPU
Error in This error is an internal software error.
programmer link
Address
F0000 F0001
Error
0100 Error on fetching a receive buffer
0200 Error on returning a receive buffer
0300 Error on reserving a transmit buffer
F8
0400 Error on transmitting a receive buffer
0500 Reserved
0600 ADS interface between PLC and IF PLC faulty
END OF SECTION
2 Diagnostics on the PLC
2.2 Additional error information (ACCU 3 low byte, DB 1 DW 161–163)