SINUMERIK
documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the “Remarks” column.
Status code in the “Remarks” column:
A New documentation.. . . .
B Unrevised reprint with new Order No.. . . .
C Revised edition with new status. . . . .
If factual changes have been made on the page since the last edition, this is
indicated by a new edition coding in the header on that page.
Edition Order No. Remarks
09.95 6FC5198–5AB40–0BP0 A
04.96 6FC5198–5AB40–0BP1 C
08.96 6FC5198–5AB40–0BP2 C
07.97 6FC5198–6AB40–0BP0 C
01.99 6FC5198–6AB40–0BP1 C
09.01 6FC5198–6AB40–0BP2 C
This manual is included in the documentation on CD–ROM (DOCONCD)
Edition Order No. Remarks
11.01 6FC5 198–6CA00–0BG2 C
Trademarks
SIMATIC
R
, SIMATIC HMI
R
, SIMATIC NET
R
, SIROTEC
R
, SINUMERIK
R
and SIMODRIVE
R
are trademarks
of Siemens AG. All other product and system names are registered trademarks of their respective
companies and must be treated accordingly.
For further informationvisit our Internet address:
http://www.ad.siemens.de/sinumerik
This publication was produced with Interleaf V 7
The reproduction, transmission or use of this document or its
contents is not permitted wihout express written authority. Offenders
will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved.
Siemens AG 1996–2001. All rights reserved.
Other functions not decribed in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences might
exist and therefore we cannot guarantee that they are completely
identical. The information contained in this document is, however,
reviewed regularly and any necessary changes will be included in the
next edition. We welcome suggestions for improvement.
Subject to change without prior notice.
Siemens–AktiengesellschaftOrder No. 6FC 5198–6AB40–0BP2
Printed in the Federal Republic of Germany
To Next Page
Loading...
Need help?
General
