Siemens SIPART PS2 Service Manual

Wiring
4.3 Power Specifications
PS2 Troubleshooting Guide
Service Manual, 03/2017, A5E36661550-AA
45
Basic device
without Ex protec-
tion
Basic device
with Ex d explo-
sion protection
Basic device
with "ia" explosion
protection
Basic device with
explosion protec-
tion "ic", "na", "t"
• Without Hart
(6DR50..)
– Typical
– max.
6.36 V (=318 Ω)
6.48 V (324 Ω)
6.36 V (=318 Ω)
6.48 V (324 Ω)
7.8 V (=390 Ω)
8.3 V (=415 Ω)
7.8 V (=390 Ω)
8.3 V (=415 Ω)
• With HART
(6DR53..)
– Typical
– max.
7.9 V (=395 Ω)
8.4 V (=420 Ω)
- - -
• With HART
(6DR51
– Typical
– max.
6.6 V (=330 Ω)
6.72 V (=336 Ω)
6.6 V (=330 Ω)
6.72 V (=336 Ω)
- -
• With HART
(6DR52..)
– Typical
– max.
-
8.4 V (=420 Ω)
8.8 V (=440 Ω)
8.4 V (=420 Ω)
8.8 V (=440 Ω)
8.4 V (=420 Ω)
8.8 V (=440 Ω)
• Static destruc-
tion limit
±40 mA ±4 mA - -
Effective internal
capacitance C
i
• Without HART
- - 11 nF "ic": 11 nF
• With HART
- - 11 nF "ic": 11 nF
Effective internal
inductance L
i
• Without HART
- - 207 μH "ic": 207 μH
• With HART
- - 304 μH "ic": 310 μH
For connecting to
circuits with the
following peak
values
- - U
i
= 30 V
I
i
= 100 mA
P
i
= 1 W
"ic": U
i
= 30 V /
I
i
= 100 mA
"ec"/"t"/"nA":
U
n
≤ 30 V /
I
n
≤ 100mA

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h