EasyManuals Logo

Siemens SIPROCESS GA700 Quick Start

Siemens SIPROCESS GA700
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Operation
8.1 Local User Interface (LUI)
106
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
To display detailed information about the current messages in the main view, follow the
steps below:
1. If necessary, open the main view:
To do this, press the <MEAS> key.
Follow the instructions on the display.
2. Display the list of current messages (display 4/4) in the main view:
To do this, use the <
>/<
> keys.
3. Activate the selection mode:
Press <ENTER>.
4. Display detailed information:
Select one of the displayed messages with the <
>/<
> keys.
Confirm your selection by pressing the <ENTER> key.
Detailed information about the message is displayed.
If required, acknowledge the message and eliminate the causes named in th
e
mes
sage text.
Log on/log off (PIN)
All device parameters are assigned to one of four user levels. You do not need to log on for
the lowest user level. But write access to parameters always requires the corresponding
authorization for security reasons:
Protected parameters are identified by the symbol
. If you want to edit a protected
parameter or start a wizard, you are prompted in a window to enter a PIN of the currently
required user level. The PIN consists of four numbers each of which is represented by a *
during input.
The PIN numbers shown in the table are factory settings. For your own safety, we
recommend that you change these PIN numbers.
The currently selected user level remains set until you log off or select a higher user level. As
long as you are logged on, the device is locked for other write accesses, for example,
SIMATIC PDM via Ethernet.
When you log off (2 x <MEAS>), you can either accept the changes or discard all of them.
Table 8- 2 Overview of the user levels
User level
Description
Basic No PIN required. Generally read-only access.
Exceptions: Basic settings, for example, display brightness or setting of filters
without PIN input.
Standard
'1111'
In addition to Basic: Write access with Standard PIN to parameters that influ-
ence the current operation of the device, for example, basic calibration.

Table of Contents

Other manuals for Siemens SIPROCESS GA700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIPROCESS GA700 and is the answer not in the manual?

Siemens SIPROCESS GA700 Specifications

General IconGeneral
BrandSiemens
ModelSIPROCESS GA700
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals