Siemens SIPROCESS GA700 - Option modules

Combination operation
4.4 Plug & Measure: Permissible activities
30
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
Table 4- 9 Plug & Measure - AM slot change
Case
Description
Data synchronization/Action
PM
AMx
Unchan-
ged
AM1 →
AM2
AM2 →
AM1
Internal swapping of modules be-
tween slots is not permitted!
Install the modules once again in
their previous slot and restart the
device.
None
Unchan-
ged
AM1 = 0
AM2 →
AM1
An AM is removed.
Retrofitting: Remaining AM is insert-
ed in the slot that has opened up
Automatic data synchronization, no
action required by user.