Manual 7SJ45 Installation and commissioning
C53000-K1174-C001-7 57
Figure 2-5 Jumper location for the 7SJ45 with relay output
2.9 Installation and commissioning
H1
S6
S1S2S3
S4
S5
T3
T2
T1
T6
T5
T4
X30
312
X11
WARNING!
Hazardous voltages are present in this electrical equipment during
operation. Non–observance of the safety rules can result in severe
personal injury or property damage. In particular, all safety notes and
warnings must be strictly observed.
The 7SJ45 overcurrent protection must be installed in a switchgear
cubicle, or on a standard DIN rail if installed on a switchgear panel.
After the installation, the entire terminal area must be sufficiently
protected against inadvertent contact with live parts.
To Next Page
Loading...
Need help?
General
