1 Using PROFINET IO
1.4 Additional Ethernet Services and Protocols
14 SIPROTEC 4, Communication Module PROFINET IO, Communication Profile
C53000-L1840-C360-1, Edition 08.2012
1.4 Additional Ethernet Services and Protocols
The following additional services and protocols are supported on the EN100. These services can be switched
ON or OFF using DIGSI. Siemens recommends switching off unused services for security reasons.
Services
• Module homepage (HTTP)
• Firmware upgrade (HTTP)
• DIGSI 4 over EN100
• SNMP V2
• IEC 61850 and GOOSE
•SNTP
For more information, refer to the following manual:
Ethernet Module EN100 for IEC 61850 with Electrical/Optical 100 Mbit Interface,
Order number C53000-G1140-C167-x
com_profinet-io_profile_us.book Page 14 Friday, August 17, 2012 1:40 PM
To Next Page
Loading...
