3SIPROTEC 4, Communication Module PROFINET IO, Communication Profile
C53000-L1840-C360-1, Edition 08.2012
Preface
Purpose of this Manual
This manual describes the communication profile of the SIPROTEC 4 Communication Modules with
PROFINET IO. The protocol is available on the electrical and the optical EN100 module.
Target Audience
Protection engineers, commissioning engineers, persons who are involved in setting, testing and service of
protection, automation, and control devices, as well as operation personnel in electrical plants and power
plants.
Scope of Validity of this Manual
This manual is valid for the SIPROTEC 4 Communication Modules with PROFINET IO.
Additional Support
Should further information be desired or should particular problems arise which are not covered sufficiently for
the purpose of the purchaser, the matter should be referred to the local Siemens representative.
Our Customer Support Center provides around-the-clock support.
Phone: +49 (180) 524-8437
Fax: +49 (180) 524-2471
Internet: http://www.siprotec.com
E-mail: support.ic@siemens.com
Training Courses
If you are interested in our current training program, contact our training center:
Siemens AG
Siemens Power Academy TD
Humboldtstr. 59
D-90459 Nuremberg
Germany
Phone: +49 (911) 433-7415
Fax: +49 (911) 433-7929
e-mail: power-academy.energy@siemens.com
Internet: www.siemens.com/energy/power-academy
com_profinet-io_profile_us.book Page 3 Friday, August 17, 2012 1:40 PM
To Next Page
Loading...
Need help?
General
