Siemens SIREMOBIL Iso-C

Siemens AG SPR2-230.101.02.06.02 SIREMOBIL Iso-C
07.05 CS PS 24
General Information 25
Page 25 of 46
Medical Solutions
5.2 Are the warning devices functioning
properly?
3. Electrical safety, checks:
SIE Audible warning signal
SIE Radiation indicators
5.3. Do all system movements stop prop-
erly in their end positions?
3. Mechanical safety, check:
SIM Lifting column
3. Electrical safety, check:
SIE 3D reconstruction
5.4 Does the collision protection device
stop all system movements properly (e.g.,
collision protection)?
Check the collision protection, if it is
installed.
Otherwise: n.a.
5.5. Are all safety distances (wall, floor,
ceiling) met or ensured by other appropri-
ate measures (such as light barriers)?
Check the measures if they are installed:
Otherwise: n.a.
5.6. Are the other safety shutdown devices
functioning properly (e.g., safety floor
plate)?
Check the measures if they are installed:
Otherwise: n.a.
5.7 Are the positions of the table and sys-
tem reproducible (e.g., zero positions, layer
height, etc.)?
n.a.
Technical safety checks, test certificate
of the check
Maintenance instructions for the
check/comments