Siemens SIROTEC System Manual

Drive functions
5.10 Position measuring system
Hydraulic Drive
System Manual, 04/2015, 6SL3097-4BA00-0BP1
185
5.10
Position measuring system
Description
One measuring system must be used for each axis as a piston rod position sensor.
SINAMICS HLA can simultaneously evaluate a maximum of 3 measuring systems. The
velocity control always operates with the first measuring system.
Possible connection configurations
● Using the integrated interface
– Incremental encoder (TTL) with (A, B and R track)
– Absolute encoder (SSI)
Measurement evaluation without incremental track is permitted.
● Using DRIVE-CLiQ encoders
– SMC30
– TTL
– SMC/SME20
Encoder assignment
You can find a description of the encoder assignment in Chapter "Configuration - Encoder
assignment (Page 64)".
Encoder configuration
You can find a description of the encoder configuration in Chapter "Configuration - encoder 1
... 3 (Page 66)".
Overview of important parameters (see SINAMICS S120/S150 List Manual)
•
p0400[0...n]
Encoder type s
election
•
p0401[0...n]
Encoder type OEM selection
•
p0404[0...n]
Encoder configuration active
•
p0405[0...n]
Square
-wave encoder A/B track
•
p0407[0...n]
Linear encoder scale
•
p0408[0...n]
Rotary encoder pulse No.
•
p0410[0...n]
Encoder inversion actual value

Siemens SIROTEC Specifications

General

Brand	Siemens
Model	SIROTEC
Category	DC Drives
Language	English