Configuration
61
Siemens Building Technologies
Fire Safety & Security Products 03.2007
Fig. 61 Check Recording screen
Highlighting the box under the Interval heading beside each alarm-in and
pressing the
button allows you to change the interval that you want the
DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30
days or Never.
3. Highlight the Storage tab and the Storage screen displays.
Fig. 62 Storage screen
Storage
1. Highlight the box beside Disk Bad Notify, and press the
button.
Î Select percentage level of bad disk sectors at which you want the DVR to
trigger an alert. Percentage levels range from 10% to 90%.
2. Highlight the box beside Disk Almost Full Notify, and press the
button.
Î Select the percentage level of disk usage at which you want the DVR to
trigger an alert. Percentage levels range from 80% to 99%.
3. Highlight the Setup… box beside Disk S.M.A.R.T., and press the
button.
Î The S.M.A.R.T. Setup screen appears.
To Next Page
Loading...
