Configuration
68
Siemens Building Technologies
Fire Safety & Security Products 03.2007
8.9 Configuring devices
You can configure the video, audio, alarm, display and remote control devices
connected to the DVR.
Fig. 71 Devices menu
8.9.1 Camera setup screen
Highlight Camera in the Devices menu and press the button.
Î The Camera setup screen appears.
Fig. 72 Camera setup screen
You can turn the camera number On or Off, and you can change the Title of each
camera using the virtual keyboard. You can also determine which cameras will
display on the monitors by selecting Normal, Covert 1 or Covert 2 from a drop-
down list in the Use column.
NOTE
When selecting the Covert 1, the DVR displays the camera title and status icons on the covert video.
When selecting the Covert 2, the DVR displays only camera title on the covert video.
NOTE
A user who does not have Covert Camera View authority, the user cannot view video from cameras
set to Covert 1 or Covert 2 in both the live monitoring and playback modes.
1. Highlight the PTZ tab, and the PTZ setup screen displays.
To Next Page
Loading...
