Configuration
70
Siemens Building Technologies
Fire Safety & Security Products 03.2007
6. Configure the port’s setting based on the PTZ camera manufacturer’s
instructions.
Î You can save your Camera changes by highlighting OK and pressing the
button.
Î Selecting Cancel exits the screen without saving the changes.
8.9.2 Audio setup screen
Highlight Audio in the Devices menu and press the button.
Î The Audio setup screen appears.
Fig. 76 Audio setup screen
The DVR can record up to four audio inputs.
1. Highlight the box beside the input and press the
button.
Î A list of cameras appears, and you can select the camera associated with that
audio input.
2. Highlight Enable Audio-Out and press the
button.
Î This toggles between enabling and disabling audio out.
NOTE
The DVR will not record audio when the recording speed is set to less than 1 ips.
Î You can save your Audio setup by highlighting Save and pressing the
button.
Î Selecting Cancel exits the screen without saving the changes.
To Next Page
Loading...
