Configuration
60
Siemens Building Technologies
Fire Safety & Security Products 03.2007
3. Highlight the box beside Spot Monitor and press the button.
Î A list of SPOT monitors and cameras appears.
Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects an input on
the selected text-in device.
Î You can save your Text-In changes by highlighting Save and pressing the
button.
Î Selecting Cancel exits the screen without saving the changes.
8.7.5 System Event screen
Highlight System Event in the Event menu and press the button.
Î The System Event setup screen appears.
Fig. 60 Health Check screen
Health Check
The DVR can be configured to run self-diagnostics and report the results.
Highlighting the box beside System and pressing the
button allows you to
select the interval that you want the DVR to run self-diagnostics on the system.
You can select from 1 hr. to 30 days or "Never".
1. Highlight the Setup... box beside Check Recording and press the
button.
Î The Check Recording screen appears.
2. Highlighting Schedule On and pressing the
button toggles On and Off.
Î When set to On, you can select the day, time range and interval that you want
the DVR to run self-diagnostics on the recorder. The Interval can be selected
from 1 min. to 7 days or "Never". The
box allows you to delete a check
recording schedule.
To Next Page
Loading...
