Operation
100
Siemens Building Technologies
Fire Safety & Security Products 03.2007
Î
You can also toggle On and Off self-diagnostic events as part of your search.
The choices are:
– Panic Record
– Check Recording
– Check Alarm-In
– Disk Almost Full
– Disk Bad
– Disk Temperature
– Disk S.M.A.R.T.
Î Once you set your desired search conditions, highlight Search and press the
button to display the search results in the Event Log Search screen.
Î Selecting Cancel exits the screen without saving the changes.
9.10.4 Text-In Search
Fig. 114 Text-In Search screen
The DVR maintains a log of each time there is Text Input. The Text-In Search
screen displays this list. Use the arrow buttons to highlight the event for which you
would like to see video.
Pressing the
button will extract the video associated with the Text Input and
display the first image of the event. Pressing the Play/Pause button will start
playing the “event” video segment. Pressing Search returns to live monitoring.
NOTE
It is possible that no recorded image displays on the current screen. Press the Display button and
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.
NOTE
Text Input information will be overlaid on the image while the recorded video is played at regular
speed.
You can also narrow your event search by selecting the Option… button and
setting up the new search condition.
To Next Page
Loading...
Need help?
General
