Installing/Mounting
4.3 Orienting the sensor
SITRANS F M MAG 3100
24 Operating Instructions, 06/2010, A5E03005599-01
Example:
A flow of 3 m/s (V) in a sensor with a diameter reduction from DN 100 to DN 80 (d
1
/d
2
= 0.8)
gives a pressure drop of 2.9 mbar.
For installation conditions for transmitters, see respective transmitter operating instructions.
4.3 Orienting the sensor
The sensor operates in all orientations, but Siemens has the following recommendations:
● Vertical installation with an upwards flow
Figure 4-3 Vertical orientation, upwards flow
To Next Page
Loading...
