Service and maintenance
6.4 Unit repair
SITRANS F M MAG 3100
40 Operating Instructions, 06/2010, A5E03005599-01
Handling
Figure 6-1 Handling of sensor
6.4 Unit repair
CAUTION
Repair and service must be carried out by Siemens authorized personnel only.
Note
Siemen
s Flow Instruments defines sensors as non-repairable products.
6.5 Technical support
If you have any technical questions about the device described in these Operating
Instructions and do not find the right answers, you can contact Technical Support:
● Via the Internet using the Support Request:
Support request (http://www.siemens.com/automation/support-request
)
● Via Phone:
– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575
Further information about our technical support is available in the Internet at
Technical support (http://support.automation.siemens.com/WW/vi
ew/en/16604318)
To Next Page
Loading...
