Introduction
1.4 Device identification
MAG 6000 I / MAG 6000 I Ex de transmitter
8 Operating Instructions, 04/2016, A5E02083319-AG
The following table lists the most important changes made to the documentation in the
current and previous editions.
03/2011
• First edition
• Transmitter upgrade information included
3.04
4.06 X06
12/2011
• Updated ATEX approval
• General update
4.04
4.07 X06
09/2012
• Enhanced current output function
• Updated menu functions; possibility of showing user
defined units in display
• Updated ATEX approval
• General update
4.06 X06 4.08 X06
01/2015
• Graphics, technical data and factory settings
changed to comprise:
– "BBL42" is displayed as the default setting in
customer unit instead of "?". The unit can still be
changed.
– Improved minimum supply voltage for current
output to 12 V.
• Document revision identification changed according
to new SIEMENS standard
4.06 X06 4.06 X06
04/2016
• Various technical specifications updated
• Control drawing updated
08
09
4.04
Device identification
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
claims for damage are to be made promptly to the carrier.
2. Make sure the scope of delivery, and the information on the namelate corresponds to the
ordering information
To Next Page
Loading...
