Siemens SITRANS FMS500 - Transportation and storage

There you will 󹪝nd:
• The latest product information, FAQs, downloads, tips and tricks.
• Our newsletter, providing you with the latest information about your products.
• Our bulletin board, where users and specialists share their knowledge worldwide.
• You can 󹪝nd your local contact partner for Industry Automation and Drives Technologies in
our partner database.
• Information about 󹪝eld service, repairs, spare parts and lots more under Services.
Additional Support
If you have additional questions about the device, please contact your local Siemens
representative and o󹪟ces at:
Local contact person (http://www.automation.siemens.com/partner)
6.3 Transportation and storage
To guarantee su󹪟cient protection during transport and storage, observe the following:
• Keep the original packaging for subsequent transportation.
• Devices/replacement parts should be returned in their original packaging.
• If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide su󹪟cient protection during transport. Siemens cannot assume liability
for any costs associated with transportation damages.
NOTICE
Insu󹪟cient protection during storage
The packaging only provides limited protection against moisture and in󹪝ltration.
• Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in Technical
speci󹪝cations (Page45).
Service and maintenance
6.3Transportation and storage
SITRANS FMS500
40 Operating Instructions, 01/2024, A5E52677520-AA