Siemens SITRANS FMS500 - Introduction; Purpose of this documentation; Document history; Designated use

Introduction
1
1.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, 󹪝rst review its principle of operation.
The instructions are aimed at persons mechanically installing, connecting and
commissioning the device, as well as service and maintenance engineers.
1.2 Document history
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to
each previous edition.
Edition Remarks
01/2024 First edition
1.3 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
speci󹪝cations (Page45).
1.4 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clari󹪝cation.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
SITRANS FMS500
Operating Instructions, 01/2024, A5E52677520-AA 5