Siemens SITRANS FMS500 - Return procedure; Disposal

Handling
Figure6-1 Handling of sensor
6.4 Return procedure
To return a product to Siemens, see Returns to Siemens (www.siemens.com/returns-to-
siemens).
Contact your Siemens representative to clarify if a product is repairable, and how to return
it. They can also help with quick repair processing, a repair cost estimate, or a repair report/
cause of failure report.
NOTICE
Decontamination
The product may have to be decontaminated before it is returned. YourSiemens contact
personwill let you know for which products this is required.
6.5 Disposal
Devices described in this manual should be recycled. They may not be dis‐
posed of in the municipal waste disposal services according to the Directive
2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a locally
approved disposal service for eco-friendly recycling. Observe the speci󹪝c
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE) (https://
support.industry.siemens.com/cs/document/109479891/)
Service and maintenance
6.5Disposal
SITRANS FMS500
Operating Instructions, 01/2024, A5E52677520-AA 41